luda
标头设置：
Step1:首先执行“设计节”中的节任务，单击“插入”，然后单击“页眉和页脚”。(PS:以后可以排版论文的逐节工作(例如目录不需要页码等)
step 1: after performing the section operation in ' section break design 'Click insert and then Click the header and footer。(PS : it can be convenient for the section-by-section operation of the paper las)Such as : the table of contents does not need page number）
Step2:单击“页眉页脚选项”选择“奇偶页面不同”、“显示奇数页面页眉横档”、“显示偶数页面页眉横档”。
step 2: click the header and footer options，check ' odd and even pages are different '' show odd page header horizontal line '
偶数页是“某大学本科毕业设计(论文)”，居中排序，奇数页中间排序是每一章的名字。字体采用宋体5号。
Step3:设置字体选择并直接修改字体格式。
The center alignment of even pages is ' a university undergraduate graduation design(thesis)'and The center alignment of odd papages
Step 3: set the font to select，and then directly modify the font format。
Step4:选择“每页排序”“排序”“排序”选项卡“停止插入”，然后在“排序依据”中选择排序依据操作。
step 43360 insert alignment tab stop is selected for each page alignment，and the alignment datum operation is selected in align datum。
地板文章设计：
页脚放置页码，页码在边线之下隔行居中放置；摘要、目录、图录、表录、注释表等文前部分的页码用罗马数字单独编排，正文以后，从引言开始的页码用阿拉伯数字连续编排。
页脚放置页码，且居中放置。
Step1：点击插入，再点击页码，最后点击页脚中间。
The page numbers are placed in the footer, and the page numbers are interlaced and centered below the edges; the page numbers of the first parts of the abstract, table of contents, catalogues, tables, notes tables, etc. are arranged separately in Roman numerals, and after the main text, the page numbers starting from the introduction are arranged continuously in Arabic numerals.
The footer places the page number, and it is centered.
Step1: Click Insert, then the page number, and finally the middle of the footer.
摘要、目录、图录、表录、注释表等文前部分的页码用罗马数字单独编排。
Step2：点击页码，选择最下方的页码。
The page numbers of the first parts of the abstract, table of contents, catalogue, annotation table, etc. are arranged separately in Roman numerals.
Step2: Click the page number and select the bottom page number.
Step3：根据Step2的操作就可以看到“下图”，根据要求就可以设置我们所需要的页码了。通过分节符的设置，对每一节的格式进行设置。
Step3: According to the operation of Step2, you can see the "following figure", and we can set the page number we need according to the requirements. The format of each section is set by setting the section break.
分页符设计
其意义就是方便对每一节做独立的操作，主要是服务于页眉页脚的设计操作。
Step1：点击左上角的“分页”后，再选择“下一页分节符”，可以实现分节。
Its significance is to facilitate the independent operation of each section, mainly to serve the design operation of the header and footer.
Step1: Click "Pagination" in the upper left corner, and then select "Next Page Section Break" to achieve sectioning.
分节后，封面和摘要就都可以避免同时设置页码了。
做上图操作之后，就会出现一个空白图，此空白图不是单纯的空白，而是我们需要的下一节的开始。
After sections, both the cover page and the summary can avoid setting page numbers at the same time.
After doing the above image, a blank image will appear, which is not simply blank, but the beginning of the next section we need.
图表目录设计（以图设计为例）：
Step1：图片的目录插入，如下图所示，点击“下一页分节符”。（PS：可以实现论文排版的“分节”，使得图目录与文字目录有根本的区别）。
Step1: Insert the table of contents of the picture, as below screenshot shown, click "Next Section Break". (PS: it is possible to realize the "subsection" of the paper layout, so that the picture directory is fundamentally different from the text directory).
Step2：点击“引用”，再点击“插入表目录”。
Step2: Click "References" and then "Insert Table Of Contents".
Step3：点击“图”，可以选择制表符，而后就可以得到需要的图目录了。（根据需要选择其他的的标签，所以表目录的设计与图目录的设计相同）。
Step3: Click "Figure", you can select the tab, and then you can get the desired graph directory. (Select other tags as needed, so the design of the table directory is the same as the design of the diagram directory.)
得到的目录不是我们需要的，那就点击目录，参考标题修改方式即可。
The resulting table of contents is not what we need, then click on the table of contents and refer to the title modification method.
制作|黄国琦
审核|王柯杰
翻译|Google翻译
声明|本文部分素材来自网络，要有侵权请联系删除